AC Eletric Motor (AC-34/35) Drive Systems for Utility
Vehicles, Lightweight Automotive, Ground Support Equipment, Mining Vehicles, Hydraulic Pumps
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
Mining Vehicle Systems
Specialty motors designed and built for your specific applications!
To get information, please click on "Details" tab below.
Specialty motors designed and built for your specific applications!
To get information, please click on "Details" tab below.
Utility Vehicle Systems
We have a drive system to fulfill your utility vehicle requirements!
To get information, please click on "Details" tab below.
We have a drive system to fulfill your utility vehicle requirements!
To get information, please click on "Details" tab below.
Diagnostic and Troubleshooting Documentation.
To obtain this information, please click on "Details" tab below.
To obtain this information, please click on "Details" tab below.
Innovation in Motion, Powered by Electricity
Newsletter Signup
Recent Events
The Recent Events content includes an image that 'AUTO' scales. No need to resize the image, the CSS style sheet will resize the images for you, once rendered in your web page.
The AC 35 motor is designed for use in multiple applications that are listed below. It is capable of producing 63 horsepower at 2900 RPM while delivering 129 ft-lbs. of torque at 96 volts, and 650 amps(1238-7601). It is available in several different configurations depending on your needs.
In addition to the AC 35 motor we are producing a second version of the same motor size and calling it an AC 34. This motor was designed to extend the "knee" out further into the RPM range. So with the same 96 volt/650 amp controller(1238-7601), the torque reduces a bit down to 107 ft-lbs. of torque while the horsepower increases to 65 horsepower. All of these subtle changes and the knee extending out to 3800 RPM.
The motor identifications on this page have been changed to "AC 3X" to reflect the addition of the AC-34 into the AC-35 family.
The weight of this motor is around 85 pounds/38.5 Kg.
Link to power graphs:
Link to power graphs:
Here is a list of the typical applications for which this motor can be applied:
» Utility Vehicles
» Ground Support Equipment
» Motorcycle
» Mining
» Hydraulic Pump
for any questions that you might have.
OEM customers, please contact us
Of course all our systems are backed by an HPEVS and Curtis
|
AC 34/35-26.34 B-Face Vented  1 1/8" Keyed Stub Shaft with 7/8" Auxiliary Shaft |
AC 34/35-27.25 B-Face  1 1/8" keyed shaft Enclosed (not water proof) housing |
AC 34/35-28.25 C-Face  1 1/8" keyed shaft |
|
AC 34/35-28.34 C-Face Vented 1 1/8" Keyed Stub Shaft with 7/8" Auxiliary Shaft |
|
AC 34/35-31.XX SAE B Pump Flange With 15 Tooth Coupler  |
AC 34/35-31.XX SAE B Pump Flange With 13 Tooth Coupler |
